
SFP-W - Multi-Mode Fiber Port with LC Connector, TX 1310, 2KM, 155Mbps, Industrial Wide Temperature: -40°C to +85°C
Description
SFP-W Series
The transceiver from Henrich is small form factor pluggable module with standard duplex connector for fiber communications. This module is designed for multi-mode-fiber (MMF) and operates at a nominal wavelength of 1310nm with cost effective and high performance. It is with the SFP 20-pin connector to allow hot plug capability.
Specifications
Absolute Maximum Ratings
Supply Voltage | 0~4V |
Storage Temperature | -40 to +85˚C |
Operating Temperature | -40 to +85˚C |
General Specifications
Data Rate | 50 to 200Mbps, Typ: 155Mbps |
Supported Link Length on 62.5/125μm MMF |
2Km |
Supply Current | Max: 300mA |
Power Dissipation | 1000mW |
Transmitter Electrical Characteristics
Supply Voltage | 3.15 to 3.45V, Typ: 3.3V |
Data Differential Input Voltage | 400 to 2000mV |
Disable Input Voltage | -1.81 to -1.48V |
Enable Input Voltage | -1.16 to -0.88V |
POut@TX Disable Asserted | Max:-45dBm |
Transmitter Optical Characteristics
Output Optical Power on 62.5μm MMF |
-20 to -8dBm |
Center Wavelength | 1260 to 1360nm, Typ: 1310nm |
Spectral Width (RMS) | Max: 2nm |
Optical Rise Time (20%-80%) | Max: 2ns |
Optical Fall Time (20%-80%) | Max: 2ns |
Extinction Ratio | Min:8.2dB |
Receiver Electrical Characteristics
Supply Voltage | 3.15 to 3.45V, type:3.3V |
Data Differential Output Voltage | 500 to 1200mV |
Receiver LOS/SD Output Voltage-High |
Min:2.0V |
Receiver LOS/SD Output Voltage-Low |
0 to 0.8V |
Data Output Rise Time (20%-80%) | Max:2ns |
Data Output Fall Time (20%-80%) | Max:2ns |
Receiver Optical Characteristics
Maximum Receiver Power | Min: --3dBm |
Receiver Sensitivity | Max: -32dBm |
Operating Wavelength | 1100 to 1600nm |
Optical Return Loss | Max: 12dB |
Signal Detect-Asserted | Max: -32dBm avg. |
Signal Detect-Deasserted | Min: -46dBm avg. |
Signal Detect-Hysteresis | Min: 0.5dB |
Downloads