G-SFP-W - Single Mode Fiber Port with LC Connector, 2KM, TX1310nm, 1.25G, Industrial Wide Temperature:-40°C to +85°C.
Description
G-SFP-W SeriesThe transceiver from Henrich is small form factor pluggable module with standard duplex connector for fiber communications. This module is designed for mutil-mode-fiber (MMF) and operates at a nominal wavelength of 1310 nm with cost effective and high performance. It is withthe SFP 20-pin connector to allow hot plug capability. Mutil-model/1310nm/1.25G/2KM/3.3v/Industrial Wide Temperature.
Specifications
Absolute Maximum Ratings
| Supply Voltage | 0~4V |
| Storage Temperature | -40 to +85˚C |
| Operating Temperature | -40 to +85˚C |
General Specifications
| Data Rate | 0.8 to 1.5Gbps, Typ: 1.25Gbps |
| Supported Link Length on 62.5/125μm MMF |
2Km |
| Supply Current | Max: 300mA |
| Power Dissipation | Max: 1000mW |
Transmitter Electrical Characteristics
| Supply Voltage | 3.15 to 3.45V, Typ: 3.3V |
| Data Differential Input Voltage | 400 to 2000mV |
| Disable Input Voltage | -1.81 to -1.48V |
| Enable Input Voltage | -1.16 to -0.88V |
Transmitter Optical Characteristics
| Output Optical Power on 62.5μm MMF |
-10 to -0dBm |
| Center Wavelength | 1280 to 1340nm, Typ: 1310nm |
| Spectral Width (RMS) | Type: 2nm |
| Optical Rise Time (20%-80%) | Max: 0.26ns |
| Optical Fall Time (20%-80%) | Max: 0.26ns |
| Extinction Ratio | Min:8.2dB |
| POut@TX Disable Asserted | Max:-45dBm |
Receiver Electrical Characteristics
| Supply Voltage | 3.15 to 3.45V, type:3.3V |
| Data Differential Output Voltage | 500 to 1200mV |
| Data Output Rise Time (20%-80%) | Max:0.35ns |
| Data Output Fall Time (20%-80%) | Max:0.35ns |
Receiver Optical Characteristics
| Maximum Receiver Power | Min: -3dBm |
| Receiver Sensitivity | Max: -20dBm |
| Operating Wavelength | 1100 to 1600nm |
| Signal Detect-Asserted | Max: -20dBm avg. |
| Signal Detect-Deasserted | Min: -36dBm avg. |
| Signal Detect-Hysteresis | Min: 0.5dB |
Downloads
